Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Bikes

$9,500.00
THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 160mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox DHX2 Factory Series coil shock w/2-position compression switch - Fox 38 Factory Series Float 27.5" w/ 3-position adjust compression & lock-out - Stans Flow CB7 Carbon 27.5" tubeless wheels - Shimano XTR, 12-speed - Shimano XTR M9120 4-piston Ice-Tech brakes
$9,500.00
THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 130mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox DHX2 Factory Series coil shock w/2-position compression switch - Fox 36 Factory Series Float 29" w/ 3-position adjust compression & lock-out - Stans Flow CB7 Carbon 29" tubeless wheels - Shimano XTR drivetrain - Shimano XTR 4-piston brakes
$7,699.00
It would be nice if every road ride was on brand-new blacktop, but for real-world road riding, there's Warroad C Ultegra Di2. When your route inevitably turns to rubble, the 700c x 32 mm wheels and tires maintain momentum while providing traction and a supple ride. Our Class 5 VRS adds some compliance to the rear end for all-day comfort in the saddle. Dual wheel size compatibility gives you the option of 700c or 650b as terrain and preferences change, making this one of the best adventure road bikes for rides that cover a variety of terrain. Shimano's Ultegra Di2 group offers smooth shifting and proven performance so you can focus on enjoying every mile.
$7,099.00
Beargrease is our fat tire bike built to go faster than you knew fat tire bikes could go. The super-light frame and fork and the sure-footed rollover of 27.5 x 4.0" wheels and tires cover challenging terrain quickly. Versatile frame and fork mounts let you carry everything you need for the backcountry. Test yourself in a snowy endurance race or pack your camping gear and embark on a long-distance overnight bike trip.
$7,000.00
THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 160mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPX2 Factory Series Kashima EVOL shock, 3-position compression - Fox 36 Factory Series Float 27.5", 3-position adjust compression & lock-out - Stans Flow MK3 27.5" tubeless wheels - Shimano XT, 12-speed - Shimano XT M8120 4-piston Ice-Tech brakes
$6,999.99
Weighing in at less than 900g, Fuji’s Supreme features premium, ultra high-modulus carbon material that employs high compaction molding and three levels of carbon material to ensure a light, stiff frame. Kamm tail tube shapes are used throughout the frame and fork for better aerodynamic performance in real-world conditions. Progressive stack and reach geometry guarantees that all sizes, from 44 centimeters to 56 centimeters, place riders in a position ideal for the competitive female cyclist. The Oval 950 carbon wheels add to the fast, aerodynamic qualities of the frame, while a SRAM RED eTAP drivetrain gives you flawless shifting. The matching RED hydraulic disc brakes provide power and modulation for any situation. Fuji rounds out this stellar build with Vittoria Open Corsa tires, a carbon aero seat post, and a carbon handlebar.
$6,999.00
Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe carbon fork features a 12 x 100 mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)
$6,899.00
Cassidy C XT is a well-balanced carbon enduro bike. The stiff frame helps you hold your line through treacherous terrain, while Fox's Float X2 Performance shock and Float 38 Performance Elite GRIP2 soften the trail with 165 mm rear and 180 mm front travel. Progressive trail geometry and our Split Pivot suspension design keep your tires planted both down and up the mountain. On-bike cargo features such as a padded tube strap spot, top tube mount, and full-size bottle clearance support extra laps or longer days out, making Cassidy ideal for enduro adventures. Shimano's XT 1 x 12 components bring smooth shifting, wide range, and four-piston brakes to take it all to the next level. Time to start adding trails to your "must-ride" list. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$6,899.00
Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 615 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"
$6,899.00
Rustler C XT puts fun first. The lightweight carbon frame, responsive geometry, and 27.5" wheel size keep it nimble for hitting all of your favorite trail features. Split Pivot suspension design means 130 mm of supple yet progressively supportive rear travel that's active enough to provide traction when accelerating, braking, and climbing. Shimano's XT component set is revered around the world and better now than ever, with wide-range 12-speed components for smooth shifting and four-piston brakes to slow you down when necessary. With room for a full-size bottle and a top tube mount for accessories, Rustler might be the best carbon trail bike for a phenomenal day in the woods. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.
$6,799.00
For an all-mountain bike with an adventurous side, Blackthorn C XT is the ticket. We designed the stiff carbon fiber frame around progressive geometry that feels planted on descents and climbs. We paired Blackthorn XT's 160 mm Fox Float 36 Performance Elite GRIP2 fork with a 140 mm Fox Float X Performance Elite shock that runs on our Split Pivot suspension platform for excellent small-bump compliance and support. A padded tube strap spot, top tube mount, and bottle mount allow for pack-free riding or extending your range. The Shimano XT 1 x 12 drivetrain and four-piston brakes keep you in control through testing terrain. Blackthorn C XT is a brilliant all-mountain bike equipped for a wide variety of singletrack adventures. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.
$6,700.00
THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 130mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPS Factory Series Kashima EVOL shock - Fox 34 Performance Series Float 29", 3-position adjust compression & lock-out - Stans Flow MK3 29" tubeless wheels - Shimano XT, 12-speed - Shimano SLX 4-piston Ice-Tech hydraulic disc brakes
$6,000.00
THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 160mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPX2 Performance Series EVOL shock, 3-position compression - Fox 36 Performance Series Float 27.5", 3-position adjust compression & lock-out - Stans Flow S1 27.5" tubeless wheels - Shimano SLX, 12-speed - Shimano SLX M7120 4-piston Ice-Tech brakes
$6,000.00
THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 130mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPS Performance Series EVOL shock, 3-position compression - Fox 34 Performance Series Float 29”, 3-position adjust compression & lock-out - Stans Flow S1 29” tubeless wheels - Shimano SLX, 12-speed - Shimano SLX 4-piston brakes
$5,499.99
Prepare for takeoff on the Fuji Transonic 1.3. Years of Fuji's aero engineering pay off as their ultra-light, C10 high-modulus carbon frame propels you down the road while providing incredible stiffness and power transfer. A full-carbon tapered steerer lets you bank into any corner with precision and minimal drag, since the rest of the front-end is designed to ensure smooth, uninterrupted airflow to further increase speed. And, Oval’s 950F carbon wheels are impervious to drag as you fly undetected through the wind. Experience perfect shifting and peerless aesthetics with Shimano’s top-of-the-line Dura Ace 11-speed drivetrain. Direct-mount Shimano brakes and Fuji’s carbon seatpost keep the weight down and aerodynamics up, while the lightweight carbon handlebars from Oval Concepts ensure that you’ll fly up climbs and be close to supersonic on the flats.
$5,499.00
Warbird C Rival XPLR eTap AXS is built to tame the toughest terrain, with a Class 5 VRS-equipped high-modulus carbon fiber frameset. Our gravel race geometry puts you in a comfortable, confident riding position. On-bike cargo features let you gear up for long days of riding far from anywhere. SRAM's sure-shifting Rival XPLR eTap AXS drivetrain is a technological marvel with loads of gear range. As the industry's first gravel race bike, Warbird is designed and built to provide control, comfort, and speed when the going gets rough.
$5,499.00
Warroad C Rival eTap AXS is the cure for the common road bike. The stiff, lightweight carbon frameset with Class 5 VRS and our endurance road geometry blends performance for spirited riding with comfort for long days in the saddle on any road surface — it's our best bike for gravel and road riding. Extra mounts on the frame and fork hold everything you need for long days out. Dual wheel size compatibility lets you run up to 700c x 35 mm or 650b x 47 mm wheels and tires, and SRAM's Rival eTap AXS drivetrain feels superb and performs flawlessly, no matter where your wanderings take you.
$5,299.00
Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It’s capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 593 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that’s 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec’d with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"
$5,299.00
Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe carbon fork features a 12 x 100 mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)
$4,000.00 - $5,100.00
The official bicycle of 6’5", 287 pound, 18 year NFL veteran and 7 time Pro Bowler Lomas Brown and 6’10”, 380 pound, 19 year NBA veteran, Piston’s power forward and World Champion Rick Mahorn. The Samson750 is our top of the line e-bike with a Bafang750HD mid drive motor and a weight capacity of 400 pounds. The Samson750 is the perfect e-bike for those wanting extra weight capacity or who just want the best e-bike period. There is nothing else like it. At 750W, the Bafang HD (heavy duty) has the most power you can legally have in an e-bike in the US and the TRP Spyke disc brakes are some of the best cable actuated disc brakes available. **The Samson750 does not come with a throttle as they add extra complexity to mid drives which can put extra stress on the motor.
$5,000.00
THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 160mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPX2 Performance Series EVOL shock, 3-position compression - Fox 36 Rhythm Series Float 27.5", sweep adjust compression & lock-out - Stan's No Tubes Flow D 27.5" rims, Shimano MT410 hubs - Shimano Deore, 12-speed - Shimano MT420 4-piston brakes
$5,000.00
THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 130mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPS Performance Series EVOL shock, 3-position compression - Fox 34 Rhythm Series Float 29" w/ sweep adjust compression & lock-out - Stan's No Tubes Flow D 29" rims, Shimano MT410 15x110mm front & 12x148mm rear hubs - Shimano Deore, 12-speed - Shimano MT420 4-piston brakes
$4,999.00
Blackthorn C SLX stands out in the carbon all-mountain bike field for its capability and value. The progressive geometry feels planted on descents and steep climbs. A 160 mm Fox Float X Performance fork and 140 mm RockShox Lyrik Select+ RC shock with Split Pivot suspension design grants you the poise to plow through rock gardens, send drops, and hit doubles with confidence. Blackthorn brings you the benefits of pack-free riding, thanks to the integrated down tube strap, top tube mounts, and a bottle mount. Shimano's SLX 1 x 12 drivetrain and four-piston brakes are components you can rely on. We designed Blackthorn C SLX from the dirt up to lead the all-mountain category. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.
$4,999.00
Cassidy C SLX gives you confidence in your lines. The carbon frame tracks straight through rock gardens and over obstacles, supported by RockShox's Super Deluxe Select+ shock and ZEB Select+ RC fork—good for 165 mm rear and 180 mm front travel. The geometry is long, low, and slack enough to tame the steepest descents, but still lets you earn your turns on the climb back up. Our Split Pivot suspension design is compliant and efficient, promising predictable braking and excellent traction. On-bike cargo features include a padded tube strap spot, top tube mount, and full-size bottle clearance for longer rides and less weight in your pack (if you need one at all). The Shimano SLX 1 x 12 groupset is renowned for its reliable performance. Ready to rip? KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$4,999.00
Spearfish C SLX is a carbon XC 29er that hits a sweet spot between race-day performance and weekday fun. The carbon frame keeps things light and stiff, while the progressive XC geometry makes descending a blast and climbing a breeze. The Fox Float DPS Performance shock brings 100 mm of travel to our Split Pivot suspension design for efficient pedaling, predictable braking, and unshakeable traction. The RockShox SID Select+ fork delivers 120 mm of travel up front to help handle rock gardens and roots. With on-bike cargo features such as two-bottle capacity and top tube mounts, Spearfish keeps all your ride essentials at hand so you can focus on the trail ahead, not fumbling with a pack. Shimano's trusted SLX 1 x 12 drivetrain shifts smoothly through its wide gear range, so you won't be thrown off your rhythm by a bad shift.
$4,899.00
Rustler C SLX is a 27.5 full suspension mountain bike with a focus on maximizing trail fun. A carbon frame, 27.5" wheels, and geometry designed for a lively ride means this is a bike that comes ready to play. Rustler uses a Split Pivot suspension design for 130 mm of rear travel that is supple over small bumps, supportive on bigger hits, and delivers traction when braking, accelerating, and climbing technical terrain so you're less likely to spin out. Rustler also comes with space for a full-size water bottle and a top tube mount that accommodates all manner of ride accessories. Shimano's proven SLX drivetrain and four-piston brakes keep every ride smooth and reliable. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.
$4,699.00
Cassidy SLX is built for more than just getting downhill the fastest. Sure, the 6061-T6 aluminum frame is up for all the trail punishment you can put it through. And the RockShox Super Deluxe Select+ shock and ZEB R fork have your back with 165 mm rear and 180 mm of suspension travel on tap. Cassidy's geometry and our Split Pivot suspension design ensure your tires stick to the trail, whether you're hurtling downhill or climbing back up for another lap. Unlike other enduro bikes, Cassidy features on-bike storage, such as a tube strap spot, a top tube mount, and full-size bottle mount. This lets you extend your ride time or just get the sweaty pack off your back. With a Shimano SLX 1 x 12 drivetrain and four-piston brakes, you're equipped for any enduro course or trail day. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$4,699.00
Cutthroat C GRX 810 2x is an immensely capable carbon bikepacking bike, designed and built to be a tour de force on the Tour Divide. Cutthroat's lightweight carbon frame with Class 5 VRS offers a finely tuned blend of stiffness for pedaling efficiency and compliance for all-day comfort. Cutthroat's drop-bar mountain bike geometry is stable when picking your way down steep, loose descents but aggressive enough for enduring a full day of headwinds. Ample cargo mounts add versatility to the way you pack. Shimano's refined GRX 810 2x drivetrain delivers effortless shifting and braking and a wide gear range so you can focus on the view.
$4,599.00
A gravel ride can be whatever you want it to be: go for speed, go for distance, go for fun, go for an escape. No matter your goal, Warbird C GRX 810 2x is a comfortable and efficient way to get there. The carbon frame with Class 5 Vibration Reduction System (VRS) tames harsh roads. Our gravel race geometry grants you control on ruinous roads. Thoughtful mounting points provide places for everything from extra bottles to a light bikepacking setup. Shimano's GRX 810 2x drivetrain has proven itself as a dependable, high-performance gravel group with plenty of gear range for windy flats and steep climbs. Put it all together and you've got one of the best gravel bikes out there.
$4,599.00
For those seeking more than just the "Lightest-stiffest-most aerodynamic" road bike experience, Warroad is just the thing. The agile and full-featured carbon fiber frameset is designed with Class 5 VRS for compliance and composure on the rough stuff. Warroad's endurance road geometry is designed for sustained rides, with ample frame and fork mounts for your all-day ride provisions. Designed to accommodate both 700c and 650b wheels, Warroad riders can set up a second wheelset for changing terrain or preferences. Add Shimano's Ultegra components, renowned for light and smooth shifting, and you've got an all-road bike that feels right in every way.
$4,499.00
Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe carbon fork features a 12 x 100 mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)
$4,399.00
Blackthorn SLX is all-mountain with a side of adventure. The stiff and durable aluminum frame uses our progressive trail geometry for a ride feel that's equal parts downhill ripper and stable climber. The Split Pivot suspension design builds on those qualities with supple-to-supportive travel linked to a 140 mm RockShox Super Deluxe Select+ shock. Paired with a 160 mm RockShox Yari RC fork, Blackthorn has the chops for those rugged lines you've been eyeing. On-bike cargo features like the integrated down tube strap, top tube mounts, and a bottle mount let you keep the ride essentials on your bike rather than your back. Shimano's SLX componentry means a smooth-shifting 1 x 12 wide-range drivetrain, while the four-piston brakes offer all the stopping power you'll need. Blackthorn is a clever and capable rig that brings a lot to the all-mountain table. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Purpose-Tuned Suspension The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. Progressive Geometry Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS Carbon Main Triangle with Carbon Seatstays and Aluminum Chainstays EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. Top Tube Accessory Mounts Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. Down Tube Three-Pack Mounts Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. Integrated Repair Kit Location Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) Accommodates a 26 oz Bottle All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. Internal Sleeved Cable Routing Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. Molded Frame Protection Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. Chain Guide-Compatible Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). Stealth Dropper Post Routing Compatible with 30.9mm dropper posts for true trail bike performance. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.
$4,249.00
The Mukluk is Salsa's most versatile fat bike, designed and engineered to excel in a wide variety of conditions. The frame utilizes 197mm rear spacing to accommodate up to 5" tires, and the 100mm threaded bottom bracket allows a wide range of crank (Q-factor) choices. Alternator 1.0 dropouts allow for short chainstays and easily support single speed or geared drivetrain options. The Mukluk can do it all.
$4,099.00
Blackthorn SLX is our 29er all-mountain bike that's perfect when you're not sure what trail has in store, but you know it's going to be steep, gnarly, loose, or all of the above. Progressive geometry comes to life in a 6061-T6 aluminum frame that's built to last. The 140mm rear shock and 160mm fork make for a smooth, balanced, controlled ride when the trail is anything but. Our tried-and-true Split Pivot suspension system delivers superb small-bump compliance, remarkable climbing ability, and limitless traction, even during braking. Shimano's SLX drivetrain and four-piston brakes are exactly the copilots you want when navigating hair-raising rock gardens, high-speed descents, and stiff climbs. Blackthorn SLX is the tool of choice for all-mountain adventures.
$4,099.00
Cassidy is the natural evolution of our Split Pivot lineup. The aluminum frame is engineered for hard-charging on huge terrain, and its progressive geometry with 165mm of rear travel and a 180mm RockShox ZEB fork takes the edge off of burly rock gardens, daunting drops, and steep and sketchy trails. The Split Pivot suspension system adds pedaling efficiency and offers smooth, consistent braking throughout the travel for maximum traction. Shimano's SLX components round out the package for precise shifting, while four-piston brakes bail you out of any situation. Cassidy SLX is made for pulling off smooth moves when the terrain is anything but.
$3,900.00 - $4,000.00
The Dream750 is our mid level mid drive ebike for those who are under 300 pounds and want maximum power and comfort in the most ergonomically correct upright bike on the market. The Dream750 features Bafang’s 750W HD (heavy duty) mid drive motor, Day 6’s unparalleled comfort and ergonomics, and a 17.5Ah 48V lithium ion battery that locks to the down tube. The steepest hills and long rides are easily overcome on the Dream750. Each Dream750 features a color display, 42 tooth chainring, gear sensor, and motor cutoff brake levers. **The Dream750 does not come with a throttle as they add extra complexity to mid drives which can put extra stress on the motor.
$4,000.00
VERSATILITY Renegade enables you to be a commuter in the morning, leader of the after-work group ride and take off for a 300-mile bikepacking expedition over the weekend. All with a single bicycle. With over 20 fork and frame mounts you can now choose to mount fenders, rear carrier, low-rider front carrier (or two cages for water bottles/storage) and three front triangle water bottles. Add clearance for 700 x 50mm and 650 x 2.00"* on our steel and aluminum models, and it's clear the Renegade series is equipped to accommodate any adventure. *Renegade carbon models are designed to accommodate up to a 700c x 37mm tire without fenders or 35mm with fenders. *Steel and aluminum Renegade models are designed to accommodate up to 700c x 50mm tires without fenders and 35mm with fenders. ADVENTURE FRAME DESIGN Starting with a wide and consistent stack and reach range, we set out to design a frame that could handle on or off road conditions while maintaining a comfortable and consistent ride. As you start to review the geo chart you will notice we have 3 different fork offsets, BB drops and rear center measurements depending on frame size. This is unique. We set out to ensure every Renegade rider will experience the ultimate in adventure bike performance regardless of their frame size. Most of our competitors simply design one fork and strap it to every frame size. While this may work just fine for a bicycle that's designed to be ridden with a single tire size (think a road racing bike), it significantly impacts the handling and ride quality of an adventure bike when swapping out your 28's for 32s, 40s or even 47mm tires. Add size specific tubing, where we vary the diameter of the frame tubing depending on frame size and 2 different sized rear triangles and you have what we feel is the perfect adventure geometry for all sized riders and the best riding adventure bike period. ADVENTURE FORK DESIGN Starting with a wide and consistent stack and reach range, we set out to design a frame that could handle on or off road conditions while maintaining a comfortable and consistent ride. As you start to review the geo chart you will notice we have 3 different fork offsets, BB drops and rear center measurements depending on frame size. This is unique. We set out to ensure every Renegade rider will experience the ultimate in adventure bike performance regardless of their frame size. Most of our competitors simply design one fork and strap it to every frame size. While this may work just fine for a bicycle that's designed to be ridden with a single tire size (think a road racing bike), it significantly impacts the handling and ride quality of an adventure bike when swapping out your 28's for 32s, 40s or even 47mm tires. Add size specific tubing, where we vary the diameter of the frame tubing depending on frame size and 2 different sized rear triangles and you have what we feel is the perfect adventure geometry for all sized riders and the best riding adventure bike period. FULL RANGE The Renegade is ready for any adventure, no matter which Renegade you ride. The long and tall endurance geometry is designed specifically to ride comfortably all day on the road or in harsh conditions off-road. The smooth ride of the full carbon fiber Renegades set the bar for how we designed the steel and aluminum bikes. With disc brakes and the ability to mount up to a 47c tire, these bikes are ready to go just about anywhere. All you need is the desire to push, pedal and explore. With a full range of sizes from 44 with 650 wheels to 61cm there's always a Renegade designed just for you.
$3,999.99
Weighing in at 1050g, Fuji’s Supreme 2.1 features high-modulus carbon material that uses two levels of carbon resulting in the optimum balance of carbon strength, stiffness and weight. Kamm tail tube shapes are used throughout the frame and fork for better aerodynamic performance in real-world conditions. Progressive stack and reach geometry guarantees that all sizes, from 44 centimeters to 56 centimeters, place riders in a position ideal for the competitive female cyclist. The Oval 723 carbon wheels add lightweight versatility to this go-fast machine, while a Shimano Ultegra Di2 drivetrain gives you flawless shifting. Plus, the matching Ultegra hydraulic disc brakes provide power and modulation for any situation.
$3,999.00
Beargrease pairs a race-ready carbon frame with the capability of fat tires for the ultimate groomed-trail machine. Its trail geometry, dropper post, and 27.5" wheels grant you confidence in loose corners and descents and make for an all-season ripper. Frame and fork mounts for extra bottles and cargo make it easier to gear up for your long days out or even overnighters, and the high-performance XT/SLX drivetrain is the icing on the cake. For light-and-quick confidence on any terrain, Beargrease is one of the best carbon fat-tire bikes out there.
$3,800.00 - $3,900.00
The Journey E-bike utilizes the Nexus 8 internally geared hub and Radius disc brakes. Easy shifting, mid drive power, powerful batteries, and Day 6’s trademark comfort combine to make the Journey E-bike one of the smoothest and most comfortable E-bikes ever. **The Journey350 does not come with a throttle as they add extra complexity to mid drives which can put extra stress on the motor.
$3,899.99
Stop searching for that aerodynamic edge—you’ve found it with the Fuji Transonic 2.1. Years of Fuji's aero engineering pay off as their ultra-light, C5 high-modulus carbon frame propels you through the air while providing incredible stiffness and power transfer. A full-carbon, tapered steerer lets you bank into any corner with precision and minimal drag, since the rest of the front-end is designed to ensure smooth, uninterrupted airflow to further increase speed. Experience crisp, perfect shifts with the touch of a finger thanks to Shimano’s Ultegra 11-speed Di2 electronic drivetrain, while the Oval Concepts aero wheels roll with ease. Direct-mount Shimano brakes and carbon seatpost keep the weight down and aerodynamics up, while the lightweight bar and stem from Oval Concepts ensure that you’ll be close to supersonic.
$3,800.00
THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Triple-butted 6061 aluminum - 130mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPS Performance Series EVOL shock, 3-position compression - Fox 34 Rhythm Series Float 29" w/ sweep adjust compression & lock-out - Stan's No Tubes Flow D 29" rims, Shimano MT410 15x110mm front & 12x148mm rear hubs - Shimano Deore, 12-speed - Shimano MT420 4-piston brakes
$3,799.00
PERFORMANCE GRAVEL ALL-STAR The ultimate gravel bike for chasing PRs and podiums on race day, and all the training rides that get you there. LIVELY, SPIRITED, STABLE Perfectly capable of flying fast down the tarmac, the Cosmic Stallion really shines when things get rough. Quick, efficient, and designed for gravel riding and racing, we’re yet to find a bike that does a better job at soaking up road chatter and jealous stares. A.C.E. TUBING Painstakingly crafted from our proprietary heat-treated, air-hardened, and custom-extruded A.C.E. steel tubing, there’s nothing else like it on Earth. Learn more about A.C.E. Tubing. WHISKY NO.9 CX Disc 12 Tapered Fork Lightweight with generous tire clearance and precise handling capabilities, Whisky’s gorgeous carbon fork accommodates 12mm thru-axles and flat-mount disc brakes. WIRELESS SHIFTING Featuring SRAM Rival eTap AXS for a clean, secure, and reliable ride experience. TIRE CLEARANCE Built with versatility in mind, it accommodates tire sizes 700 x 42mm or 650b x 47mm (both with or without fenders). REAR RACK AND FENDER MOUNTS Ready to run mudguards with the ability to mount a bag or two in the back to keep you comfy on those long rides. CUSTOM DROPOUTS All-City’s signature engraved logo shines with classic style. SIGNATURE SEAT COLLAR Train your eyes on that timeless and tasteful brazed-on seat collar, elegantly designed around the All-City logo. REINFORCED BOTTLE BOSSES Beautiful stars reinforce the bottle bosses and our obsessive attention to detail. LIQUID PAINT AND E.D. COAT Our topnotch wet paint finish sparkles with depth and luster, while an E.D. coating protects against rust. PANTOGRAPHED BOTTOM BRACKET Upside-down and inside-out, AC’s signature style is stamped into the steel.
$3,799.00
Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Aluminum - TT (Effective): 636 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Aluminum frame and Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5'' front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6''
$3,799.00
Spearfish SLX is part racer, part rowdy. A 6066-T6 aluminum frame holds up to trail abuse, frame bag strap wear, long miles, you name it. Our progressive XC geometry makes descending easy and climbing efficient. Rocky, technical trails are no sweat, thanks to the efficient pedaling, predictable braking, and traction of our Split Pivot suspension design. A 100 mm Fox Float DPS Performance shock and the 120 mm RockShox SID RL fork mellow out harsh trails to reduce fatigue on long rides. Spearfish's on-bike cargo features, such as two-bottle capacity and top tube mounts, allow for longer rides between resupply points or just an extra lap before heading back to the car. Add Shimano's SLX 1 x 12 components to the mix, and you have an aluminum XC bike that you can rely on through tough racecourses and mellow loops alike.
$3,700.00
THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Triple-butted 6061 aluminum - 160mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPX2 Performance Series EVOL shock, 3-position compression - Fox 36 Rhythm Series Float 27.5", sweep adjust compression & lock-out - Stan's No Tubes Flow D 27.5" rims, Shimano MT410 hubs - Shimano Deore, 12-speed - Shimano MT420 4-piston brakes
$3,699.00
Rustler SLX is designed from the ground up to be a playful trail bike. An aluminum frame, responsive trail geometry, and the agility of 27.5" wheels mean you can get creative with the trail features. Rustler's Split Pivot suspension design makes the most of its 130 mm of rear travel and is active while accelerating, braking, and climbing for reliable traction. Shimano's SLX drivetrain performs smoothly ride after ride, and the four-piston hydraulic brakes bring the action to a halt when you need it. With space for a full-size water bottle and a top tube mount for ride accessories, it's easier to keep the fun rolling. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.
$3,649.00
Beargrease is our fat tire bike built to go faster than you knew fat tire bikes could go. The super-light frame and fork and the sure-footed rollover of 27.5 x 4.0" wheels and tires cover challenging terrain quickly. Versatile frame and fork mounts let you carry everything you need for the backcountry. Test yourself in a snowy endurance race or pack your camping gear and embark on a long-distance overnight bike trip.
$3,500.00 - $3,600.00
The Dream350 is our least expensive mid drive and it now comes with disc brakes. The Dream350 boasts a 350W Bafang mid drive motor, Day 6’s unparalleled comfort and ergonomics, and either a 14Ah or 17.5Ah 48V lithium ion battery that locks to the down tube. Hills and distance are no longer obstacles but conquered with comfort and ease. Each Dream350 features a color display, 42 tooth Lekkie chainring, and motor cutoff brake levers. **The Dream350 does not come with a throttle as they add extra complexity to mid drives which can put extra stress on the motor.
$3,599.00
The Blackthorn C frame blends a stiff carbon fiber chassis with our progressive trail geometry and Split Pivot suspension design. The result is a well-balanced platform for an all-mountain bike that descends with gusto, rails through features, and makes climbing up for lap two as painless as possible. The Fox Float X Factory shock delivers 140 mm of travel to guide you through whatever the trail serves up. On-bike cargo features hold your tube, pump, and repair kit, and more on the frame to lighten up your hip pack—or allow you to ride pack-free. We made Blackthorn C the best all-mountain bike frame around. Take it and make it your dream bike.
$3,599.00
Nobody knows what you like as well as you do. When you're hurtling down the trail at high speed, everything needs to be dialed. With 165mm of rear travel, plus our Split Pivot suspension system for pedaling efficiency and consistent braking traction, Cassidy is easy-up, easy-down. Take the Cassidy Carbon Frame, hand-select your dream team of parts, and build the enduro sled you've always wanted.
$3,549.00
Stormchaser is Salsa's gravel bike for any and all conditions. Ample tire clearance and the single speed-compatible Alternator Flat Mount dropout system will see you through the muddiest rides. Equipped with a suspension fork and dropper post, the Stormchaser GRX 810 1x SUS lets you get rowdy with your route choices.
$3,499.99
Constructed of ultra high-modulus C10 carbon with an excellent strength-to-weight ratio, the Altamira CX 1.1 is here to give you a lightweight, fast ride over muddy courses, soft sandpits, and tricky barriers. The flat top tube shape allows for easy shouldering, while an oversize downtube and chainstays increase torsional stiffness for superior pedaling efficiency. Its Press-Fit bottom bracket increases frame stiffness, reduces drivetrain flex, and maximizes power transfer. Fuji’s FC-330 full-carbon fork features a tapered steerer and 12mm thru-axle for increased rigidity and greater steering precision. Oval Concepts 935 carbon tubular wheels defy inertia, yet hold up to CX abuse, wrapped in Vittoria Terreno Mix that supply outstanding traction and buttery-smooth efficiency. SRAM’s Force 1 drivetrain efficiently turns your sweat into podium-bound speed, while flat-mount Force hydraulic disc brakes stop on command in any conditions. Carbon bars, seatpost, and saddle rails from Oval Concepts round out the top-tier spec on this no-compromise cyclocross machine.
$3,499.99
Technical trails have found their match in the all-new Auric. It features totally redesigned progressive geometry, and its lightweight frame and 27.5-inch wheels slay singletrack. The 1x drivetrains make shifting simple and easy so you can focus on the dirt, not your gears. With its modern trail geo, dropper seat post, and exceptional durability, the Auric is the perfect bike for your trail adventure. - A6-SL super-butted alloy frame is lightweight and strong - 130mm of MLink rear suspension and a 140mm travel fork provide the platform for a superior climbing and descending mountain bike - Boost 148x12 rear and Boost 110x15 front hub spacing stiffens the chassis - Internal cable routing provides clean aesthetics and protects cables from dirt and debris for consistent shifting and reduced service intervals - KS dropper seatposts on all models - 27.5" wheels keep the wheelbase in check while providing good roll over capability on rough trails
$3,499.00
Salsa Blackthorn Deore brings together performance and adventure. The aluminum frame is stiff enough to keep you on your line and durable enough to toss in a truck bed for shuttling. Our progressive geometry and Split Pivot suspension design offer a well-balanced platform for pedaling, descending, and taking on technical features. A 140 mm RockShox Super Deluxe Select shock and 160 mm RockShox 35 Gold RL fork ensure plenty of travel for gnarly drops, gaps, and other features. On-bike cargo features like a down tube strap, top tube mounts, and a bottle mount let you keep the weight of your ride gear down low on the frame so you're free to move your body without the burden of a pack. With Shimano's robust Deore 1 x 12 drivetrain backing you up, you'll find very few limits out there. Blackthorn Deore is the 29er all-mountain bike for big rides on diverse terrain. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.
$3,499.00
Built for the rigors of America's longest mountain bike race, the Tour Divide-inspired Cutthroat C GRX 600 1x is one of the best bikepacking bikes for long rides through a variety of conditions and surfaces when speed is of the essence. Designed with drop-bar mountain bike geometry and a lightweight carbon frame featuring our Class 5™ VRS for comfortable compliance, Cutthroat is ready to put in big miles on any terrain. Ample cargo mounts let you distribute weight evenly around the bike for maximum maneuverability. Shimano's GRX 600 1x drivetrain provides brilliant braking and shifting with the gear range for gravel flats and mountain passes alike.
$3,300.00 - $3,400.00
Using the Dream24 frame, the RevElation features Bafang’s ultra smooth 500W/48V rear hub motor, 180mm disc brakes, E-bike 50 rated Kenda Kwik Drumlin 26×2.20 tires, 10 speed rear derailleur with clutch and no front derailleur for easy shifting, fantastic ergonomics, choice of lithium ion batteries that lock to the down tube, disc brakes, Kenda 26×2.2 tires, throttle, and unbelievable comfort
$3,399.00
Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5™ Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing carbon fork featuring a 12 x 100mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on the underside of the down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)
$3,299.99
Perfect for flying up climbs as well as throwing down big watts in a sprint, Fuji’s SL 2.1 is incredibly light and unbelievably stiff. Born out of the quest to create one of the lightest bikes in the world, the featherweight C10 ultra high-modulus carbon frame carries you up steep climbs and down sharp, sinuous descents with supreme confidence. A tapered full-carbon fork adds minimal weight and precise, controlled handling through technical criteriums and sweeping corners on the road. An 11-speed Shimano Ultegra Di2 electronic drivetrain provides silky smooth, accurate shifting with the mere touch of a finger, while Oval Concepts aero aluminum wheels, wrapped in grippy Vittoria Zaffiro Pro tires, roll smoothly and accelerate with ease. Fuji rounded out the SL with an Oval Concepts aluminum bar and stem that keep the weight down, while the sleek Oval Concepts saddle lets you stay comfortable while others suffer on your wheel.
$3,299.99
When your goal is to finish on the podium, Fuji's SLM 29 will take you there. Constructed of C10 carbon with oversize tubing for precise steering control and high-speed stability, the SLM achieves an uncompromising balance of speed and capability. The longer top tube and short head tube create a platform that's powerful and stable, while the short chainstays and overall shortened wheelbase increase quickness on twisty trails. Front-end shock absorption is provided by the venerable Fox 32 Float fork with Boost spacing for confident tracking performance when you need it most. Power reaches the dirt through the mid-level DT Swiss X1900 tubeless-ready wheelset combined with lightweight Schwalbe Racing Ralph Evolution 2.25-inch tires. And, a list of dependable Shimano Deore XT drivetrain and braking components complete this svelte race-ready build.
Page 1 of 10 Next page