Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Shop All Bikes

Jamis Boss 7-Speed Step-Over
LEGENDARY FRAME DESIGN These one-piece single-loops stays with trailing dropout plate have been a Boss signature since 1980. Reducing the number of rear triangle welds makes these frames stronger and stiffer. And we don’t have to swage the tubes to a smaller diameter to mate with standard tabbed dropouts, allowing the stays to remain near constant in diameter, yielding an even stronger frame with a bigger, bolder style. LIGHTWEIGHT Many cruisers weigh well north of 40 pounds. Not so with the Boss! Because nothing gets more uncomfortable faster than having to pedal more weight than necessary, we’ve pared as many grams from these bikes as we could. Starting with the lightweight aluminum frame and a parts pick that’s nearly all lightweight alloy parts. The results are bikes just north of 30 pounds that are easy to pedal and more fun to ride. PERFECT FIT All Boss frame sizes (and there are six to assure the best possible fit for greater comfort and more secure handling) offer an extra-long stem quill and head tube and hi-rise handlebars for a comfortable, upright ride position EASY TO SIT ON The Boss Saddle is as plush as it gets—quilted top, wide body, fully stuffed, double-loop springs—and is offered in both male- and female-specific lengths and widths. The Taxi saddle is as durable as it gets, with an extra-thick 3 mil cover to resist puncture, a flat top that won’t pool water when the Taxi is parked in the rain, box section rails that will never bend, and double-loop springs that comfortably support passengers. SMOOTH ROLLING TIRES Our comfort tires have been designed to roll smoothly on pavement, but offer a large 2.35" footprint so that rides on park paths can be managed securely. The additional benefit of that big footprint is larger air volume in the tire and tube, which results in lower air pressure for a more comfortable ride than tires with smaller volumes and higher air pressures. COMFORTABLE STEERING Our cruise-control handlebars were designed to promote a comfortable no-weight-on-the-wrists riding position. With just the right sweep and rise, these handlebars meet the rider’s hands without requiring a forward bend at the waist, relieving pressure on the back of the neck. Handlebar width has also been carefully calculated so that when steered from left to right it does not contact the rider, unlike many other cruiser-style handlebars. RUST RESISTANT Many of the parts specified on our Boss are made of aluminum to save weight, but also to help preserve the finish of the bike. Aluminum parts include the seat post, seat clamp, stem, rims, front hub, kickstand, and crank arms. We’ve even specified a specially treated chain on the Taxi that protects the chain against rust in even the harshest conditions. In fact, this coating increases the rust-resistance of the chain up to 500 times (!) that of a regular chain.
Jamis Boss Coaster
Boss Coaster is what we’d call seriously casual— designed to be low maintenance, built for comfort, but with the durability to be ridden every day for years. Sometimes, all you need is one gear and a coaster brake, and that’s just what you get. The Boss Coaster keeps it simple, so you can keep smiling. Laid-back cruiser bars and a double-sprung saddle let you keep your chill all day long, and cushy tires iron out the boardwalk and choppy roads for silky-smooth cruising.
Jamis Boss Coaster Step-Over
LEGENDARY FRAME DESIGN These one-piece single-loops stays with trailing dropout plate have been a Boss and Taxi signature since 1980. Reducing the number of rear triangle welds makes these frames stronger and stiffer. And we don’t have to swage the tubes to a smaller diameter to mate with standard tabbed dropouts, allowing the stays to remain near constant in diameter, yielding an even stronger frame with a bigger, bolder style. LIGHTWEIGHT Many cruisers weigh well north of 40 pounds. Not so with the Boss and Taxi! Because nothing gets more uncomfortable faster than having to pedal more weight than necessary, we’ve pared as many grams from these bikes as we could. Starting with the lightweight aluminum frame and a parts pick that’s nearly all lightweight alloy parts. The results are bikes just north of 30 pounds that are easy to pedal and more fun to ride. PERFECT FIT All Boss frame sizes (and there are six to assure the best possible fit for greater comfort and more secure handling) offer an extra-long stem quill and head tube and hi-rise handlebars for a comfortable, upright ride position EASY TO SIT ON The Boss Saddle is as plush as it gets -- quilted top, wide body, fully stuffed, double-loop springs -- and is offered in both male and female specific lengths and widths. The Taxi saddle is as durable as it gets, with an extra-thick 3 mil cover to resist puncture, a flat top that won’t pool water when the Taxi is parked in the rain, box section rails that will never bend, and double-loop springs that comfortably support passengers. SMOOTH ROLLING TIRES Our comfort tires have been designed to roll smoothly on pavement, but offer a large 2.35” footprint so that rides on park paths can be managed securely. The additional benefit of that big footprint is larger air volume in the tire and tube, which results in lower air pressure for a more comfortable ride than tires with smaller volumes and higher air pressures. COMFORTABLE STEERING Our cruise-control handlebars were designed to promote a comfortable no-weight-on-the-wrists riding position. With just the right sweep and rise, these handlebars meet the rider’s hands without requiring a forward bend at the waist, relieving pressure on the back of the neck. Handlebar width has also been carefully calculated so that when steered from left to right it does not contact the rider, unlike many other cruiser-style handlebars. RUST RESISTANT Many of the parts specified on our Boss and Taxi are made of aluminum to save weight, but also to help preserve the finish of the bike. Aluminum parts include the seat post, seat clamp, stem, rims, front hub, kickstand, and crank arms. We’ve even specified a specially treated chain on the Taxi that protects the chain against rust in even the harshest conditions. In fact, this coating increases the rust-resistance of the chain up to 500 times that of a regular chain.
Jamis Boss Cruiser CB Step-Over
Boss Cruiser BC is what we’d call seriously casual— designed to be low maintenance, built for comfort, but with the durability to be ridden every day for years. Sometimes, all you need is one gear and a coaster brake, and that’s just what you get. The Boss Cruiser BC keeps it simple, so you can keep smiling, and a Step-Over frame makes getting on and off a breeze. Laid-back cruiser bars and a double-sprung saddle let you keep your chill all day long, and cushy tires iron out the boardwalk and choppy roads for silky-smooth cruising.
Jamis Citizen
Comfortable, enjoyable mobility: that's Citizen. This is the ultimate low-carbon-footprint, sightseeing machine. It's a low-impact and fun workout for new cyclists and a zero-emissions way to get around town. We can't think of a better way to be a good Citizen. Easy to look at. Easy to get on We're super proud of the Citizen's sleek frame design. With an arcing top tube for the "men's" frames and s-bend top and down tubes for a super-low step-thru 'women's" version. In fact, we hesitate to designate either with gender specific labels because the version with the easy-access, low step-over top tube is suitable for anyone with limited hip flexibility who might be challenged to swing a leg over the rear wheel when mounting & dismounting. And easy to ride When it comes to recreational riding, nothing gets more uncomfortable faster than having to pedal more weight than necessary. That is why Citizen 1, 2 & 3 are built with lightweight 6061 aluminum tubing. In fact, our aluminum Citizen frames are at least a half-pound lighter than our famous steel coda street bikes. We design comfort into the naturally stiffer ride of the aluminum tubes by specifying larger volume 38c tires and adding a few millimeters to the chainstay and wheelbase length. Ride position A usual complaint from new or returning riders trying to get into the cycling groove is feeling uncomfortably perched forward with too much weight on their wrists and having to crank their necks backwards just to be able to see in traffic. We specifically designed our Citizens to remedy this. The large diameter 700c wheels push handlebar height up and shorter top tubes pull handlebars closer to the saddle, all to mitigate forward lean. Our 4-inch rise handlebars sweep back at a natural hand-grasp angle with a long-quilled or angle-adjustable stem that allows for a wide range of adjustment to tune handle bar height and reach perfectly for each ride. Where it counts Our super plush saddle features memory foam padding (Citizen 2 & 3) or extra high-quality polyurethane padding (Citizen 1 & Citizen) for optimum support with maximum comfort. The slip-resistant suede-type top prevents sliding and the burnished side panels reduce leg friction while pedaling. Elastomer springs help soak up high resonance road vibrations. Offered in gender-specific sizes. Why 700c? So why go with a Citizen instead of an Explorer or a Hudson since they all seem to offer many of the same comfort and quality attributes? It's simple: if your riding will be primarily on the road or on smoothly graded trails, the larger diameter road-bike sized 700c Citizen wheels roll faster with less rolling resistance and roll over potholes and railroad tracks more smoothly than the 27.5" wheels of the Explorer and Hudson. Geared to go The drivetrains on our Citizen 1, 2, & 3 all feature long cage rear derailleurs, full- size 48/38/28t triple chainring cranksets, and big 11-32t or 14-34t gearing in the back. This gives you the dual advantage of having fairly tall gears for controlled pedaling at speed on descents as well as really low gearing for easier pedaling uphill. It's a rider-friendly combination that's made the Citizens a perennial favorite of recreational cyclists.
Jamis Citizen 1
Comfortable, enjoyable mobility: that's Citizen. This is the ultimate low-carbon-footprint, sightseeing machine. It's a low-impact and fun workout for new cyclists and a zero-emissions way to get around town. We can't think of a better way to be a good Citizen. Easy to look at. Easy to get on We're super proud of the Citizen's sleek frame design. With an arcing top tube for the "men's" frames and s-bend top and down tubes for a super-low step-thru 'women's" version. In fact, we hesitate to designate either with gender specific labels because the version with the easy-access, low step-over top tube is suitable for anyone with limited hip flexibility who might be challenged to swing a leg over the rear wheel when mounting & dismounting. And easy to ride When it comes to recreational riding, nothing gets more uncomfortable faster than having to pedal more weight than necessary. That is why Citizen 1, 2 & 3 are built with lightweight 6061 aluminum tubing. In fact, our aluminum Citizen frames are at least a half-pound lighter than our famous steel coda street bikes. We design comfort into the naturally stiffer ride of the aluminum tubes by specifying larger volume 38c tires and adding a few millimeters to the chainstay and wheelbase length. Ride position A usual complaint from new or returning riders trying to get into the cycling groove is feeling uncomfortably perched forward with too much weight on their wrists and having to crank their necks backwards just to be able to see in traffic. We specifically designed our Citizens to remedy this. The large diameter 700c wheels push handlebar height up and shorter top tubes pull handlebars closer to the saddle, all to mitigate forward lean. Our 4-inch rise handlebars sweep back at a natural hand-grasp angle with a long-quilled or angle-adjustable stem that allows for a wide range of adjustment to tune handle bar height and reach perfectly for each ride. Where it counts Our super plush saddle features memory foam padding (Citizen 2 & 3) or extra high-quality polyurethane padding (Citizen 1 & Citizen) for optimum support with maximum comfort. The slip-resistant suede-type top prevents sliding and the burnished side panels reduce leg friction while pedaling. Elastomer springs help soak up high resonance road vibrations. Offered in gender-specific sizes. Why 700c? So why go with a Citizen instead of an Explorer or a Hudson since they all seem to offer many of the same comfort and quality attributes? It's simple: if your riding will be primarily on the road or on smoothly graded trails, the larger diameter road-bike sized 700c Citizen wheels roll faster with less rolling resistance and roll over potholes and railroad tracks more smoothly than the 27.5" wheels of the Explorer and Hudson. Geared to go The drivetrains on our Citizen 1, 2, & 3 all feature long cage rear derailleurs, full- size 48/38/28t triple chainring cranksets, and big 11-32t or 14-34t gearing in the back. This gives you the dual advantage of having fairly tall gears for controlled pedaling at speed on descents as well as really low gearing for easier pedaling uphill. It's a rider-friendly combination that's made the Citizens a perennial favorite of recreational cyclists.
Jamis Citizen 1 Step-Thru
Comfortable, enjoyable mobility: that's Citizen. This is the ultimate low-carbon-footprint, sightseeing machine. It's a low-impact and fun workout for new cyclists and a zero-emissions way to get around town. We can't think of a better way to be a good Citizen. Easy to look at. Easy to get on We're super proud of the Citizen's sleek frame design. With an arcing top tube for the "men's" frames and s-bend top and down tubes for a super-low step-thru 'women's" version. In fact, we hesitate to designate either with gender specific labels because the version with the easy-access, low step-over top tube is suitable for anyone with limited hip flexibility who might be challenged to swing a leg over the rear wheel when mounting & dismounting. And easy to ride When it comes to recreational riding, nothing gets more uncomfortable faster than having to pedal more weight than necessary. That is why Citizen 1, 2 & 3 are built with lightweight 6061 aluminum tubing. In fact, our aluminum Citizen frames are at least a half-pound lighter than our famous steel coda street bikes. We design comfort into the naturally stiffer ride of the aluminum tubes by specifying larger volume 38c tires and adding a few millimeters to the chainstay and wheelbase length. Ride position A usual complaint from new or returning riders trying to get into the cycling groove is feeling uncomfortably perched forward with too much weight on their wrists and having to crank their necks backwards just to be able to see in traffic. We specifically designed our Citizens to remedy this. The large diameter 700c wheels push handlebar height up and shorter top tubes pull handlebars closer to the saddle, all to mitigate forward lean. Our 4-inch rise handlebars sweep back at a natural hand-grasp angle with a long-quilled or angle-adjustable stem that allows for a wide range of adjustment to tune handle bar height and reach perfectly for each ride. Where it counts Our super plush saddle features memory foam padding (Citizen 2 & 3) or extra high-quality polyurethane padding (Citizen 1 & Citizen) for optimum support with maximum comfort. The slip-resistant suede-type top prevents sliding and the burnished side panels reduce leg friction while pedaling. Elastomer springs help soak up high resonance road vibrations. Offered in gender-specific sizes. Why 700c? So why go with a Citizen instead of an Explorer or a Hudson since they all seem to offer many of the same comfort and quality attributes? It's simple: if your riding will be primarily on the road or on smoothly graded trails, the larger diameter road-bike sized 700c Citizen wheels roll faster with less rolling resistance and roll over potholes and railroad tracks more smoothly than the 27.5" wheels of the Explorer and Hudson. Geared to go The drivetrains on our Citizen 1, 2, & 3 all feature long cage rear derailleurs, full- size 48/38/28t triple chainring cranksets, and big 11-32t or 14-34t gearing in the back. This gives you the dual advantage of having fairly tall gears for controlled pedaling at speed on descents as well as really low gearing for easier pedaling uphill. It's a rider-friendly combination that's made the Citizens a perennial favorite of recreational cyclists.
Jamis Citizen 2
Comfortable, enjoyable mobility: that's Citizen. This is the ultimate low-carbon-footprint, sightseeing machine. It's a low-impact and fun workout for new cyclists and a zero-emissions way to get around town. We can't think of a better way to be a good Citizen. Easy to look at. Easy to get on We're super proud of the Citizen's sleek frame design. With an arcing top tube for the "men's" frames and s-bend top and down tubes for a super-low step-thru 'women's" version. In fact, we hesitate to designate either with gender specific labels because the version with the easy-access, low step-over top tube is suitable for anyone with limited hip flexibility who might be challenged to swing a leg over the rear wheel when mounting & dismounting. And easy to ride When it comes to recreational riding, nothing gets more uncomfortable faster than having to pedal more weight than necessary. That is why Citizen 1, 2 & 3 are built with lightweight 6061 aluminum tubing. In fact, our aluminum Citizen frames are at least a half-pound lighter than our famous steel coda street bikes. We design comfort into the naturally stiffer ride of the aluminum tubes by specifying larger volume 38c tires and adding a few millimeters to the chainstay and wheelbase length. Ride position A usual complaint from new or returning riders trying to get into the cycling groove is feeling uncomfortably perched forward with too much weight on their wrists and having to crank their necks backwards just to be able to see in traffic. We specifically designed our Citizens to remedy this. The large diameter 700c wheels push handlebar height up and shorter top tubes pull handlebars closer to the saddle, all to mitigate forward lean. Our 4-inch rise handlebars sweep back at a natural hand-grasp angle with a long-quilled or angle-adjustable stem that allows for a wide range of adjustment to tune handle bar height and reach perfectly for each ride. Where it counts Our super plush saddle features memory foam padding (Citizen 2 & 3) or extra high-quality polyurethane padding (Citizen 1 & Citizen) for optimum support with maximum comfort. The slip-resistant suede-type top prevents sliding and the burnished side panels reduce leg friction while pedaling. Elastomer springs help soak up high resonance road vibrations. Offered in gender-specific sizes. Why 700c? So why go with a Citizen instead of an Explorer or a Hudson since they all seem to offer many of the same comfort and quality attributes? It's simple: if your riding will be primarily on the road or on smoothly graded trails, the larger diameter road-bike sized 700c Citizen wheels roll faster with less rolling resistance and roll over potholes and railroad tracks more smoothly than the 27.5" wheels of the Explorer and Hudson. Geared to go The drivetrains on our Citizen 1, 2, & 3 all feature long cage rear derailleurs, full- size 48/38/28t triple chainring cranksets, and big 11-32t or 14-34t gearing in the back. This gives you the dual advantage of having fairly tall gears for controlled pedaling at speed on descents as well as really low gearing for easier pedaling uphill. It's a rider-friendly combination that's made the Citizens a perennial favorite of recreational cyclists.
Jamis Citizen 2 Step-Thru
Comfortable, enjoyable mobility: that's Citizen. This is the ultimate low-carbon-footprint, sightseeing machine. It's a low-impact and fun workout for new cyclists and a zero-emissions way to get around town. We can't think of a better way to be a good Citizen. Easy to look at. Easy to get on We're super proud of the Citizen's sleek frame design. With an arcing top tube for the "men's" frames and s-bend top and down tubes for a super-low step-thru 'women's" version. In fact, we hesitate to designate either with gender specific labels because the version with the easy-access, low step-over top tube is suitable for anyone with limited hip flexibility who might be challenged to swing a leg over the rear wheel when mounting & dismounting. And easy to ride When it comes to recreational riding, nothing gets more uncomfortable faster than having to pedal more weight than necessary. That is why Citizen 1, 2 & 3 are built with lightweight 6061 aluminum tubing. In fact, our aluminum Citizen frames are at least a half-pound lighter than our famous steel coda street bikes. We design comfort into the naturally stiffer ride of the aluminum tubes by specifying larger volume 38c tires and adding a few millimeters to the chainstay and wheelbase length. Ride position A usual complaint from new or returning riders trying to get into the cycling groove is feeling uncomfortably perched forward with too much weight on their wrists and having to crank their necks backwards just to be able to see in traffic. We specifically designed our Citizens to remedy this. The large diameter 700c wheels push handlebar height up and shorter top tubes pull handlebars closer to the saddle, all to mitigate forward lean. Our 4-inch rise handlebars sweep back at a natural hand-grasp angle with a long-quilled or angle-adjustable stem that allows for a wide range of adjustment to tune handle bar height and reach perfectly for each ride. Where it counts Our super plush saddle features memory foam padding (Citizen 2 & 3) or extra high-quality polyurethane padding (Citizen 1 & Citizen) for optimum support with maximum comfort. The slip-resistant suede-type top prevents sliding and the burnished side panels reduce leg friction while pedaling. Elastomer springs help soak up high resonance road vibrations. Offered in gender-specific sizes. Why 700c? So why go with a Citizen instead of an Explorer or a Hudson since they all seem to offer many of the same comfort and quality attributes? It's simple: if your riding will be primarily on the road or on smoothly graded trails, the larger diameter road-bike sized 700c Citizen wheels roll faster with less rolling resistance and roll over potholes and railroad tracks more smoothly than the 27.5" wheels of the Explorer and Hudson. Geared to go The drivetrains on our Citizen 1, 2, & 3 all feature long cage rear derailleurs, full- size 48/38/28t triple chainring cranksets, and big 11-32t or 14-34t gearing in the back. This gives you the dual advantage of having fairly tall gears for controlled pedaling at speed on descents as well as really low gearing for easier pedaling uphill. It's a rider-friendly combination that's made the Citizens a perennial favorite of recreational cyclists.
Jamis Citizen 3
Comfortable, enjoyable mobility: that's Citizen. This is the ultimate low-carbon-footprint, sightseeing machine. It's a low-impact and fun workout for new cyclists and a zero-emissions way to get around town. We can't think of a better way to be a good Citizen. Easy to look at. Easy to get on We're super proud of the Citizen's sleek frame design. With an arcing top tube for the "men's" frames and s-bend top and down tubes for a super-low step-thru 'women's" version. In fact, we hesitate to designate either with gender specific labels because the version with the easy-access, low step-over top tube is suitable for anyone with limited hip flexibility who might be challenged to swing a leg over the rear wheel when mounting & dismounting. And easy to ride When it comes to recreational riding, nothing gets more uncomfortable faster than having to pedal more weight than necessary. That is why Citizen 1, 2 & 3 are built with lightweight 6061 aluminum tubing. In fact, our aluminum Citizen frames are at least a half-pound lighter than our famous steel coda street bikes. We design comfort into the naturally stiffer ride of the aluminum tubes by specifying larger volume 38c tires and adding a few millimeters to the chainstay and wheelbase length. Ride position A usual complaint from new or returning riders trying to get into the cycling groove is feeling uncomfortably perched forward with too much weight on their wrists and having to crank their necks backwards just to be able to see in traffic. We specifically designed our Citizens to remedy this. The large diameter 700c wheels push handlebar height up and shorter top tubes pull handlebars closer to the saddle, all to mitigate forward lean. Our 4-inch rise handlebars sweep back at a natural hand-grasp angle with a long-quilled or angle-adjustable stem that allows for a wide range of adjustment to tune handle bar height and reach perfectly for each ride. Where it counts Our super plush saddle features memory foam padding (Citizen 2 & 3) or extra high-quality polyurethane padding (Citizen 1 & Citizen) for optimum support with maximum comfort. The slip-resistant suede-type top prevents sliding and the burnished side panels reduce leg friction while pedaling. Elastomer springs help soak up high resonance road vibrations. Offered in gender-specific sizes. Why 700c? So why go with a Citizen instead of an Explorer or a Hudson since they all seem to offer many of the same comfort and quality attributes? It's simple: if your riding will be primarily on the road or on smoothly graded trails, the larger diameter road-bike sized 700c Citizen wheels roll faster with less rolling resistance and roll over potholes and railroad tracks more smoothly than the 27.5" wheels of the Explorer and Hudson. Geared to go The drivetrains on our Citizen 1, 2, & 3 all feature long cage rear derailleurs, full- size 48/38/28t triple chainring cranksets, and big 11-32t or 14-34t gearing in the back. This gives you the dual advantage of having fairly tall gears for controlled pedaling at speed on descents as well as really low gearing for easier pedaling uphill. It's a rider-friendly combination that's made the Citizens a perennial favorite of recreational cyclists.
Jamis Citizen 3 Step-Thru
Comfortable, enjoyable mobility: that's Citizen. This is the ultimate low-carbon-footprint, sightseeing machine. It's a low-impact and fun workout for new cyclists and a zero-emissions way to get around town. We can't think of a better way to be a good Citizen. Easy to look at. Easy to get on We're super proud of the Citizen's sleek frame design. With an arcing top tube for the "men's" frames and s-bend top and down tubes for a super-low step-thru 'women's" version. In fact, we hesitate to designate either with gender specific labels because the version with the easy-access, low step-over top tube is suitable for anyone with limited hip flexibility who might be challenged to swing a leg over the rear wheel when mounting & dismounting. And easy to ride When it comes to recreational riding, nothing gets more uncomfortable faster than having to pedal more weight than necessary. That is why Citizen 1, 2 & 3 are built with lightweight 6061 aluminum tubing. In fact, our aluminum Citizen frames are at least a half-pound lighter than our famous steel coda street bikes. We design comfort into the naturally stiffer ride of the aluminum tubes by specifying larger volume 38c tires and adding a few millimeters to the chainstay and wheelbase length. Ride position A usual complaint from new or returning riders trying to get into the cycling groove is feeling uncomfortably perched forward with too much weight on their wrists and having to crank their necks backwards just to be able to see in traffic. We specifically designed our Citizens to remedy this. The large diameter 700c wheels push handlebar height up and shorter top tubes pull handlebars closer to the saddle, all to mitigate forward lean. Our 4-inch rise handlebars sweep back at a natural hand-grasp angle with a long-quilled or angle-adjustable stem that allows for a wide range of adjustment to tune handle bar height and reach perfectly for each ride. Where it counts Our super plush saddle features memory foam padding (Citizen 2 & 3) or extra high-quality polyurethane padding (Citizen 1 & Citizen) for optimum support with maximum comfort. The slip-resistant suede-type top prevents sliding and the burnished side panels reduce leg friction while pedaling. Elastomer springs help soak up high resonance road vibrations. Offered in gender-specific sizes. Why 700c? So why go with a Citizen instead of an Explorer or a Hudson since they all seem to offer many of the same comfort and quality attributes? It's simple: if your riding will be primarily on the road or on smoothly graded trails, the larger diameter road-bike sized 700c Citizen wheels roll faster with less rolling resistance and roll over potholes and railroad tracks more smoothly than the 27.5" wheels of the Explorer and Hudson. Geared to go The drivetrains on our Citizen 1, 2, & 3 all feature long cage rear derailleurs, full- size 48/38/28t triple chainring cranksets, and big 11-32t or 14-34t gearing in the back. This gives you the dual advantage of having fairly tall gears for controlled pedaling at speed on descents as well as really low gearing for easier pedaling uphill. It's a rider-friendly combination that's made the Citizens a perennial favorite of recreational cyclists.
Jamis Coda S1
Our Codas have been some of our most popular bikes for years, and for good reason. There's the smooth-riding Reynolds Chromoly frames, the well-thought-out geometry, and the heads-up riding position. Not to mention the smart component selections, from a super-wide gearing range to easy-adjust stems. These bikes are simply some of the best and most versatile around.
Jamis Coda S1 Femme
Our Codas have been some of our most popular bikes for years, and for good reason. There's the smooth-riding Reynolds Chromoly frames, the well-thought-out geometry, and the heads-up riding position. Not to mention the smart component selections, from a super-wide gearing range to easy-adjust stems. These bikes are simply some of the best and most versatile around.
Jamis Coda S2
Our Codas have been some of our most popular bikes for years, and for good reason. There's the smooth-riding Reynolds Chromoly frames, the well-thought-out geometry, and the heads-up riding position. Not to mention the smart component selections, from a super-wide gearing range to easy-adjust stems. These bikes are simply some of the best and most versatile around.
Jamis Coda S2 Femme
Our Codas have been some of our most popular bikes for years, and for good reason. There's the smooth-riding Reynolds Chromoly frames, the well-thought-out geometry, and the heads-up riding position. Not to mention the smart component selections, from a super-wide gearing range to easy-adjust stems. These bikes are simply some of the best and most versatile around.
Jamis Coda S3
Our Codas have been some of our most popular bikes for years, and for good reason. There's the smooth-riding Reynolds Chromoly frames, the well-thought-out geometry, and the heads-up riding position. Not to mention the smart component selections, from a super-wide gearing range to easy-adjust stems. These bikes are simply some of the best and most versatile around.
Jamis Coda S3 Step-Over
Our Codas have been some of our most popular bikes for years, and for good reason. There's the smooth-riding Reynolds Chromoly frames, the well-thought-out geometry, and the heads-up riding position. Not to mention the smart component selections, from a super-wide gearing range to easy-adjust stems. These bikes are simply some of the best and most versatile around.
Jamis Critter
Every Jamis youth bike uses size-specific items like grips, saddles and cranks that enhance comfort and control by providing the best possible bike fit. We focus on designing frames with low stand-over’s to take much of the awkwardness out of getting on board and dismounting after. We trim as much weight as we can with lightweight aluminum frames on many of the youth models and use aluminum parts where possible (the limiting factor here is working within a youth bike appropriate price point) to work towards that make-it-as-light-as-possible goal.
Jamis DXT A1
The dual-sport DXTs are pumped-up, go-anywhere/do-anything versions of a fitness bike, with more gearing range to take on steeper hills and tougher terrain, as well as wider tires with a trail-capable tread for access to more riding areas, both paved and packed. Disc brakes and suspension forks add real off-road exploration and off-pavement adventure.
Jamis DXT A1 Step-Over
The dual-sport DXTs are pumped-up, go-anywhere/do-anything versions of a fitness bike, with more gearing range to take on steeper hills and tougher terrain, as well as wider tires with a trail-capable tread for access to more riding areas, both paved and packed. Disc brakes and suspension forks add real off-road exploration and off-pavement adventure.
Jamis DXT A2
The dual-sport DXTs are pumped-up, go-anywhere/do-anything versions of a fitness bike, with more gearing range to take on steeper hills and tougher terrain, as well as wider tires with a trail-capable tread for access to more riding areas, both paved and packed. Disc brakes and suspension forks add real off-road exploration and off-pavement adventure.
Jamis DXT A2 Step-Over
The dual-sport DXTs are pumped-up, go-anywhere/do-anything versions of a fitness bike, with more gearing range to take on steeper hills and tougher terrain, as well as wider tires with a trail-capable tread for access to more riding areas, both paved and packed. Disc brakes and suspension forks add real off-road exploration and off-pavement adventure.
Jamis DXT A3
The dual-sport DXTs are pumped-up, go-anywhere/do-anything versions of a fitness bike, with more gearing range to take on steeper hills and tougher terrain, as well as wider tires with a trail-capable tread for access to more riding areas, both paved and packed. Disc brakes and suspension forks add real off-road exploration and off-pavement adventure.
Jamis DXT A3 Step-Over
The dual-sport DXTs are pumped-up, go-anywhere/do-anything versions of a fitness bike, with more gearing range to take on steeper hills and tougher terrain, as well as wider tires with a trail-capable tread for access to more riding areas, both paved and packed. Disc brakes and suspension forks add real off-road exploration and off-pavement adventure.
Jamis Divide
The Divide is a great choice for rugged commutes and dirt paths as well as perfectly capable for off-road, recreational trail riding. A lightweight aluminum frame equipped with rear rack mounts, disc brakes, knobby tires, and a suspension fork allows you to get out there and explore with confidence. Wheel size: Sizes 13-inch – 15-inch: 27.5" Sizes 17-inch – 21-inch: 29"
Jamis Divide Step-Over
The Divide is a great choice for rugged commutes and dirt paths as well as perfectly capable for off-road, recreational trail riding. A lightweight aluminum frame equipped with rear rack mounts, disc brakes, knobby tires, and a suspension fork allows you to get out there and explore with confidence.
Jamis Dragon 29
If you thrive on connection to the trail, if you live for the flow of a screaming descent—Dragon 29 will take you there without the added weight and complexity of dual suspension.
Jamis Durango A1
These may be the most affordable 29'ers in our stable, but there's nothing entry-level about the performance of these bikes. Best-in-Class performance and Big Hoops doesn't have to mean Big Bucks and the Durango proves it. Durango frame design The Durango frame features a sloping top tube that optimizes stand-over clearance while adding great looks at the same time. The over-sized down tube and head tube to offer plenty of strength, stiffness, and fork crown clearance. Pedaling platform The aluminum frame on the Durango is beefed up to include a larger 34.9mm seat tube, which allows us to spec an over-sized 31.6mm seat post. The larger diameter post flexes less, providing a firmer pedaling platform. Zero Stack internal headset Durangos feature a zero stack internal headset that places both the cups and bearings inside the head tube instead of outside. This reduces the total stack height (including the head tube), which is especially beneficial on big wheeled bikes. The larger diameter head tube also provides a larger weld interface at the critical head/top/down tube junction. Top tube cable routing Running the cables up under the top tube keeps cables and housing out of the muck for more precise and reliable shifting performance. Dual water bottle mounts Every Durango offers two water bottle mounts located inside the main frame. This provides excellent hydration capacity in an easily accessible position. Replaceable derailleur hanger Because it's much easier and much less expensive to replace a derailleur hanger than it is to repair or replace a frame, every Durango frame offers a replaceable derailleur hanger designed to yield in a crash before the frame does.
Jamis Durango A2
These may be the most affordable 29'ers in our stable, but there's nothing entry-level about the performance of these bikes. Best-in-Class performance and Big Hoops doesn't have to mean Big Bucks and the Durango proves it. Durango frame design The Durango frame features a sloping top tube that optimizes stand-over clearance while adding great looks at the same time. The over-sized down tube and head tube to offer plenty of strength, stiffness, and fork crown clearance. Pedaling platform The aluminum frame on the Durango is beefed up to include a larger 34.9mm seat tube, which allows us to spec an over-sized 31.6mm seat post. The larger diameter post flexes less, providing a firmer pedaling platform. Zero Stack internal headset Durangos feature a zero stack internal headset that places both the cups and bearings inside the head tube instead of outside. This reduces the total stack height (including the head tube), which is especially beneficial on big wheeled bikes. The larger diameter head tube also provides a larger weld interface at the critical head/top/down tube junction. Top tube cable routing Running the cables up under the top tube keeps cables and housing out of the muck for more precise and reliable shifting performance. Dual water bottle mounts Every Durango offers two water bottle mounts located inside the main frame. This provides excellent hydration capacity in an easily accessible position. Replaceable derailleur hanger Because it's much easier and much less expensive to replace a derailleur hanger than it is to repair or replace a frame, every Durango frame offers a replaceable derailleur hanger designed to yield in a crash before the frame does.
Jamis Earth Cruiser 1
We designed our Earth Cruisers to be kinder, gentler versions of our sport comfort bikes. They're simplified with easy-to-use coaster brake drivetrains without the complications of derailleurs or hand brakes to fiddle around with. In spite of their name, they're not just for riding at the beach. They're for any rider anywhere looking for a simple, lightweight, low-maintenance, good-looking bike they can casually and comfortably pedal around town all day, every day. DIET CRUISER Many cruisers weigh well north of 40 pounds. Not so with the Earth Cruiser. Because nothing gets more uncomfortable faster than having to pedal more weight than necessary, we've pared as many grams from the Earth Cruiser as we could. Starting with the lightweight aluminum frame and a parts pick that's nearly all lightweight alloy parts. The result is a 29-pound Earth Cruiser 1 that's pure joy to pedal. LOOKS GREAT TODAY & TOMORROW Many of the parts specified on our Earth Cruisers are made of aluminum to save weight, but also to help preserve the finish of the bike. Aluminum parts include the seat post, seat clamp, stem, rims, front hub, kickstand and crank arms (EC3 and EC1). We've even specified a silver-plated chain on the EC3 and EC1 that doesn't just look great, it's way more rust-resistant than standard carbon steel chains. COMFORTABLE STEERING Our cruise-control handlebars were designed to promote a comfortable no-weight-on-the-wrists riding position. With just the right sweep and rise, these handlebars meet the rider's hands without requiring a forward bend at the waist, relieving pressure on the back of the neck. Handlebar width has also been carefully calculated so that when steered from left to right it does not contact the rider, unlike many other cruiser-style handlebars. MEMORY FOAM SADDLE Our Earth Cruiser saddles are not just great looking, they're extraordinarily comfortable as well. Though the size and shape is clearly generous, we've also molded a channel into the top of the saddle to relieve sitting pressure and use high-quality memory or polyurethane foam for the supporting mattress. Memory foam was originally developed by NASA and is now used extensively for medical applications. It is much denser than the foams ordinarily used in saddles, which makes it more supportive and more comfortable. SMOOTH ROLLING TIRES Our comfort tires have been designed to roll smoothly on pavement, but offer a large 2.125" footprint so that rides on park paths can be managed securely. The additional benefit of that big footprint is larger air volume in the tire and tube, which results in lower air pressure for a more comfortable ride than tires with smaller volumes and higher air pressures. NO-SLIP PEDALS Our Earth Cruisers pedals offer a thermoplastic elastomer insert on both sides of the pedal surface that keeps shoes and sandals from slipping when soles or pedals get wet. These inserts also make barefoot pedaling comfortable.